AN1310UA-E Sub GHz module with Texas Instruments cc1310 chipset

Cansec 868mhz 1W Transceiver Module TI CC1310 UART Wireless Rf Transmitter Receiver Module

Vbat=3.3V Fquency=434/470MHz

Parameter		Min	Typ	Max	Unit
Operating Voltage		1.8	-	3.8	V
Operating Temperature		-20	-	+70	℃
Current Consumption	Sleep Mode	-	-	1	uA
	Receive mode	-	5.5	-	mA
	Transmit Mode (For Carrier &&UFL Connector)	-	35	38	mA
TX Power (For Carrier)		-	13	14	dBm
RX Sensitivity		-	-	-124	dBm
Distance(434M)		400			m

Vbat=3.3V Fquency=868/915MHz

Parameter		Min	Typ	Max	Unit
Operating Voltage		1.8	-	3.8	V
Operating Temperature		-20	-	+70	℃
Current Consumption	Sleep Mode	-	-	1	uA
	Receive mode	-	5.5	-	mA
	Transmit Mode (For Carrier &&UFL Connector)	-	34	36	mA
TX Power (For Carrier)		-	13	14	dBm
RX Sensitivity		-	-	-115	dBm
Distance(868M)		700			m

AN1310UA-E Sub GHz module with Texas Instruments cc1310 chipset

1. The AN1310 module is designed based on CC1310F128. The CC1310 device is the first part in a Sub-1-GHz family of cost-effective, ultra low power wireless MCUs. The CC1310 device combines a flexible, very low power RF transceiver with a powerful 48-MHz Cortex-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.

2. The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC-DC converter.

3. Sensors can be handled in a very low-power manner by a dedicated autonomous ultra low power MCU that can be configured to handle analogue and digital sensors; thus the main MCU (Cortex-M3) is able to maximize sleep time.

4. The CC1310 power and clock management and radio systems require specific configuration and handling by software to operate correctly. This has been implemented in the TI RTOS, and it is therefore recommended that this software framework is used for all application development on the device. The complete TI-RTOS and device drivers are offered in source code free of charge.

Applications

433-, 433-, 868-, 915- ISM and SRD Systems

• Low-Power Wireless Systems With 50-kHz to 5-MHz Channel Spacing
• SmartGrid and Automatic Meter Reading
• Home and Building Automation
• Wireless Alarm and Security Systems
• Industrial Monitoring and Control
• Wireless Healthcare Applications
• Wireless Sensor Networks
• Active RFID
• IEEE 802.15.4g, IP-Enabled Smart Objects (6LoWPAN), Wireless M-Bus, KNX Systems, Wi-SUN, ZigBee and Proprietary Systems
• Energy Harvesting Applications
• ESL (Electronic Shelf Label)
• Long-Range Sensor Applications
• Heat Cost Allocator

We are Beijing JiaAn Electronics Technology, founded in 1994; Taiwan invested.

We are the third-party partner of Texas Instruments and the supplier of Arrow Electronics;

along with over 25 years of experience in the RF industry,

we developed a team with deep technical background,

high performance and quick response timing to co-operate with our clients globally.

About 70 per cent of our clients are overseas, and 80 per cent of our clients are returning customers.

All our products require layers and layers of inspections, testing and quality control procedures before shipping;

Offering our client a trustworthy and long-lasting partnership.